Filter
Top Products
Configuring KIRK Wireless Server 600v3 119
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.4 Setting LDAP Replicators (Secondary)
In a KIRK Wireless Server 600v3 Multi-cell solution the Secondary KIRK Wireless Server 600v3
needs access to the information (such as system ARI code and user data) that are stored on the
Master KIRK Wireless Server 600v3/LDAP Server. Therefore, it is necessary to activate the
LDAP replicator services for the Secondary KIRK Wireless Server 600v3.
1 Under the Configuration menu, click LDAP, and then click Replicator.
Figure 72 Adm. Page: Configuration/LDAP/Replicator page
2 In the Server field, type the IP address of the Master KIRK Wireless Server 600v3 - or the
LDAP Server, if this is part of your installation.
3 In the User field, type the user name.
4 In the Password field, type the password.
Note: The password wil be verified against the Master KIRK Wireless Server 600v3.
5 Select the Enable check box.
6 Click OK.
7 Click Reset (under Administration menu) to save your configuration.