Filter
Top Products
120 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.6.4.5 Configuring DECT System (Secondary)
1 Under the Configuration menu, click DECT, and then click System.
Figure 73 Adm. Page: Configuration/DECT/System page
2 In the Name field, the name MUST ALWAYS be DECT.
If changing the name, the system cannot operate.
3 In the PDW (password) field, type the password, and then type it again in the field below.
4 Click OK.
5 Click Reset (under Administration menu) to save your configuration.