Filter
Top Products
170 KIRK Handset Management
14117800, Ed.2
3 Change settings, and then click Apply.
4 Click OK.
9.6 Adjusting the KIRK Handset
This section provides information about:
• “Content of the KIRK Programming Kit Handset” on page 170
• “Set up of the Hardware for KIRK Handset Adjustment” on page 171
• “Adjusting the KIRK Handset with the ServiceTool” on page 171
9.6.1 Content of the KIRK Programming Kit Handset
The KIRK Programming Kit Handset (Part no. 02319509) for KIRK 3040 consists of:
• serial cable
• programming stand
• 220V power supply
The KIRK Programming Kit Handset (Part no. 02319542) for KIRK 40XX (see illustration below)
consists of:
• serial cable
• splitter
Figure 113 KIRK Programming Kit Handset
Note: For handset adjustment of KIRK 40XX you use the charger accompanying the handset.
Note: For handset adjustment you also need the programming software (ServiceTool). The
ServiceTool is not part of the KIRK Programming Kit Handset but can be downloaded from
www.kirktelecom.com.
Splitter
Serial cable