Filter
Top Products
66 Preparing KIRK Handset for Use
14117800, Ed.2
6.3.2 Installing Battery on KIRK 4020/KIRK 4040/KIRK 4080 Handsets
Note: The battery is connected to the handset when it is shipped from the factory.
Warning: The battery in a KIRK 4080 handset must not be removed in a potentially explosive
atmostphere. Only use battery type 84743416 in the KIRK 4080.
1 To change the battery unscrew the plate on the rear of the handset to access the battery
compartment. Use a normal screw driver.
2 Insert the screwdriver into the small crack behind the blind cover and break to open the
handset.
Figure 20 Remove Back Cover from Handset with Screw Fastener
3 Place the battery plug in the slot in the battery box.
4 Insert battery with the label readable.
5 Replace the back cover.