Filter
Top Products
90 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.6.1 Configuring the Master (Primary) KIRK Wireless Server 600v3
This section describes how to configure a Master KIRK Wireless Server 600v3 in a multi-cell
solution.
This section includes information about:
• “Entering a User Name and Password (Primary)” on page 90
• “Assigning a Specific IP Address (Primary)” on page 92
• “Obtaining a Multi-Cell License (Primary)” on page 93
• “Configuring Ethernet Link (Primary)” on page 95
• “Setting LDAP Mode (Primary)” on page 96
• “Setting LDAP Replicator (Primary)” on page 97
• “Configuring DECT System (Primary)” on page 98
• “Configuring DECT Master (Primary)” on page 100
• “Configuring DECT Radio (Primary)” on page 101
• Configuring TOS (Type of Service) Priorities (Primary) on page 102
For information on accessing the web based Administration Page, refer to “Accessing the Web
Based Administration Page” on page 75.
7.6.1.1 Entering a User Name and Password (Primary)
First time you access the Administration Page, you need to log on with user name and a password.
Note: The default user name of the system is admin and the default password of the system is
ip1200.
Figure 43 Adm. Page: Enter Network Password dialog box