Filter
Top Products
Configuring KIRK Wireless Server 600v3 123
KIRK Wireless Server 600v3 Installation and Configuration Guide
7 Click Reset (under Administration menu) to save your configuration.
The Secondary KIRK Wireless Server 600v3 is now configured.
Note: When configuring more KIRK Wireless Server 600v3 secondaries, it is possible to make a
backup of the configuration file of the first configured Secondary KIRK Wireless Server 600v3.
This configuration file can be used as input to configure the rest of the KIRK Wireless Server
600v3 secondaries. Fore more information about making a backup of a configuration file, refer to
“Updating Configuration File” on page 185. Fore more information about configuring KIRK
Wireless Server 600v3 secondaries using a backup configuration file of another Secondary KIRK
Wireless Server 600v3 as input, refer to
“Configuring Secondary KIRK Wireless Server 600v3
Using a Back-Up File” on page 123.
7.6.5 Configuring Secondary KIRK Wireless Server 600v3 Using a Back-Up
File
A previously saved configuration file can be loaded to the KIRK Wireless Server 600v3 and used
as input for configuration.
Note: For more information about configuring the first Secondary KIRK Wireless Server 600v3
to be used as input in the configuration of more KIRK Wireless Server 600v3 secondaries, refer to
“Configuring the Secondary KIRK Wireless Server 600v3” on page 114. Fore more information
about making a backup of a configuration file, refer to “Updating Configuration File” on page 185.
1 Upload the configuration file to the KIRK Wireless Server 600v3 secondary in question.
For more information about updating the configuration file, refer to “Updating Configuration
File” on page 185.
2 Change the IP address.
For more information about changing the IP address, refer to “Assigning a Specific IP Address
(Secondary)” on page 116.
3 Change radio ID.
For more information about changing the radio ID, refer to “Configuring DECT Radio
(Secondary)” on page 122.
4 Change Primary Sync ID.
For more information about changing the Primary Sync ID, refer to “Configuring DECT Radio
(Secondary)” on page 122.
5 Change alternative Sync ID.
For more information about changing the alternative Sync ID, refer to “Configuring DECT
Radio (Secondary)” on page 122.
6 Click Reset to save your configuration.