Filter
Top Products
70 Preparing KIRK Handset for Use
14117800, Ed.2
6.5 Retrieving the Serial Number of the KIRK Handset
To enable service to the handset, the serial number must be programmed into the system database
via the web based Administration Page of the KIRK Wireless Server 600v3. (For more
information, refer to
“Registering KIRK Handsets” on page 155).
The serial number of each handset is printed on the label, which is placed behind the the battery.
To show the serial number on the handset display, press *99984*, and then press 3; the serial
number appears on the handset display.
6.5.1 Retrieving Serial Number on KIRK 3040 Handsets
1 Press down the back cover and push it 5 mm towards the headset plug.
Figure 25 Remove Back Cover from Handset
2 Lift off back cover.
3 Lift the battery and read the serial number.
4 Replace battery and back cover.
Note: To show the serial number on the handset display, press *99984*, and then press 3; the
serial number appears on the handset display.