SpectraLink 600V3 Server User Manual


 
Installing the KIRK Wireless Server 600v3 45
KIRK Wireless Server 600v3 Installation and Configuration Guide
4.3 Installing the KIRK Wireless Server 600v3
The KIRK Wireless Server 600v3 is suitable for mounting indoors on a wall or ceiling.
A KIRK Wireless Server 600v3 covers a circular area between 50 and 300 meters, depending on
the environment.
Note: Before beginning the installation, it is important to determine the location of the KIRK
Wireless Server 600v3 for the best coverage. The radio coverage depends on the construction of
the building, architecture and choice of building materials. Refer to
“Environmental
Requirements” on page 25 for more information about environmental requirements for KIRK
Wireless Server 600v3.
Note: Avoid installing KIRK Wireless Server 600v3 on large concrete or marble columns
because these columns affect radio coverage. If possible, place the KIRK Wireless Server 600v3 a
minimum of one meter from these types of columns. Do not install a KIRK Wireless Server 600v3
with the antenna housings near metal objects. Be careful not to damage existing wiring or panels.
Note: Do not position KIRK Wireless Server 600v3 in ducts, plenums, or hollow spaces used to
transport environmental air except where the duct, plenum or hollow space is created by a
suspended ceiling having lay-in panels.
Note: To expand a coverage area with KIRK Wireless Server 600v3, additional radio units must
be placed in such a way that overlap between the different KIRK Wireless Server 600v3 radio
coverage is established. It is recommended that the overlap is at least 10 to 15 meters.
Note: Do not paint the KIRK Wireless Server 600v3 as paint contains material which can cause
decreased radio coverage.