162 KIRK Handset Registration and Subscription
14117800, Ed.2
8.2 Subscribing KIRK Handsets
This section provides information about:
• “Subscribing Handsets” on page 162
• “Subscribing a Handset to Different Systems” on page 163
Note: Subscription of handsets requires the use of each registered handset.
Note: To make subscriptions, the system must allow subscriptions to be made. Some systems also
require an Authentication Code (AC). If more than one system currently permits subscription, you
will need to know the ID of the system (ARI code) to which you wish to subscribe. Authentication
Codes and system ID’s (ARI codes) will be provided by the system administrator.
Before subscribing handsets you need to ensure:
• that handset battery has been charged (“Charging Battery” on page 68). Low battery could
cause subscription problems.
• that the handsets have been registered to the system (“Registering KIRK Handsets” on page
155).
8.2.1 Subscribing Handsets
1 Press MENU - go to MENU LOGIN.
2 Press 3/OK - go to SUBSCRIPTION CREATE to subscribe to a system.
3 Press 3. The handset searches for the serial number of the system.
4 Use the < > keys to scroll between the IDs systems if there is more than one system available.
During subscription, the handset searches for free positions and performs subscription on the
first free position.
5 As soon as the correct serial number of the system appears in the display, press 3.
The serial number is located on the label on the rear of the KIRK Wireless Server 600v3.
6 Enter the AC (if required) using the keyboard, and press 3.
An antenna symbol appears on the display to indicate a successful subscription. If not, the
subscription has failed and the procedure must be retried.