Filter
Top Products
KIRK Repeater Installation 53
KIRK Wireless Server 600v3 Installation and Configuration Guide
Figure 18 KIRK Programming Kit Repeater
5.8.2 Set up of the Hardware for Repeater Programming
1 Unplug the repeater power supply and insert the splitter.
2 Connect the repeater power supply to the splitter and the mains.
Note: Ensure that you have the appropriate power supply for the local requirements.
3 Connect the serial cable to the splitter and Com port of your computer.
The repeater is now ready for programming via the ServiceTool.
5.8.3 Programming the KIRK Repeater with the ServiceTool
The ServiceTool is the tool you access from your desktop and use for repeater programming,
handset adjustment and software download to the KIRK Handset and KIRK Repeater.
Before you start programming the repeater, ensure that the repeater is connected to the computer
and the mains.
Splitter
Serial cable