Filter
Top Products
134 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.8.1 Configuring the Master (Primary) KIRK Wireless Server 600v3
Note: To configure a KIRK Wireless Server 600v3 Multi-cell solution it is necessary to obtain a
multi-cell license from www.kirktelecom.com. Contact KIRK telecom sales support by e-mail
(mph@kirktelecom.com or hbk@kirktelecom.com) and require a multi-cell license for the KIRK
Wireless Server 600v3. You receive an e-mail containing a text file with the multi-cell license.
This file must be saved in order to be uploaded to the system.
In the Master tab you configure the Master (Primary) KIRK Wireless Server.
Figure 86 KIRK Configuration Tool: Master tab
1 In the IP Address area:
• Deselect the DHCP check box.
First time you power up the KIRK Wireless Server 600v3 it acts as a DHCP client. To
assign a specific IP address to the unit, it is necessary to disable the DHCP mode.
•In the IP Address field, type the IP address of the Master KIRK Wireless Server 600v3,
provided by your system administrator.
This IP address is now the default address when accessing the Master KIRK Wireless
Server 600v3.
•In the Network Mask field, type the network mask.
•In the Default Gateway field, type the IP address of the gateway.