Filter
Top Products
47
KIRK Wireless Server 600v3 Installation and Configuration Guide
Chapter 5 KIRK Repeater Installation
This section provides information about the KIRK Repeater and how to unpack and install it.
Installing repeaters requires a software installation as well as a hardware installation.
Before you install the equipment, ensure that a site planner defines the location of the KIRK
Repeaters.
This section includes information about:
• “Unpacking” on page 47
• “Unpacking the Shipping Container” on page 47
• “KIRK Repeater Description” on page 48
• “Installing the KIRK Repeater” on page 49
• “Recording the Installation Information” on page 52
• “Checking Indicators” on page 52
• “Powering the KIRK Repeater” on page 52
• “Programming a KIRK Repeater with the KIRK Programming Kit” on page 52
5.1 Unpacking
5.1.1 Inspect for Damage
1 Inspect the shipping carton for evidence of physical damage or mishandling prior to opening.
2 Inspect all parts for damage.
3 Report any damage to the carrier immediately.
4 If it is necessary to make a damage claim for the carrier, do not move the shipping carton until
it has been examined by a representative of the carrier.
5 Dispose of empty cartons in accordance with local regulations.
5.2 Unpacking the Shipping Container
For indoor installations, the following items should be present in every box containing a KIRK
Repeater:
•KIRK Repeater
• Mounting template for indoor installation
• Two mounting screws and anchors
5