Filter
Top Products
Configuring KIRK Wireless Server 600v3 121
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.6 Configuring DECT Master (Secondary)
On the Master page you need to define the KIRK Wireless Server 600v3 as a Secondary KIRK
Wireless Server 600v3.
1 Under the Configuration menu, click DECT, and then click Master.
Figure 74 Adm. Page: Configuration/DECT/Master page
2 From the Mode list, select Off. Selecting Off defines the KIRK Wireless Server 600v3 as a
Secondary.
3 Check that the protocol H323 is selected from the Prot (Protocol) list.
Note: The H323 Protocol is always used for internal communication between KIRK Wireless
Server 600v3 secondaries, regardless of the protocol used in the Master KIRK Wireless Server
600v3.
4 Click OK.
5 Click Reset (under Administration menu) to save your configuration.