Filter
Top Products
73
KIRK Wireless Server 600v3 Installation and Configuration Guide
Chapter 7 Configuring KIRK Wireless Server 600v3
This section provides you with information on how to power up the KIRK Wireless Server 600v3
and connect it to a computer, and also how to configure a KIRK Wireless Server 600v3 Single-cell
solution and a KIRK Wireless Server 600v3 Multi-cell solution through the web based
Administration Page and the KIRK Configuration Tool.
Using the web based Administration Page is recommended when configuring small to
medium-sized installations. Using the KIRK Configuration Tool is recommended when
configuring medium-sized to large installations.
Note: With the KIRK Configuration Tool it is possible to work offline.
This section includes information about:
• “Powering up the KIRK Wireless Server 600v3” on page 73
• “Connecting a Computer to the KIRK Wireless Server 600v3” on page 74
• “Accessing the Web Based Administration Page” on page 75
• “Accessing the KIRK Configuration Tool” on page 77
• “Configuring Single-Cell Solution through Administration Page” on page 79
• “Configuring Multi-Cell Solution through Administration Page” on page 89
• “Configuring Single-Cell Solution through KIRK Configuration Tool” on page 130
• “Configuring Multi-Cell Solution through KIRK Configuration Tool” on page 133
7.1 Powering up the KIRK Wireless Server 600v3
After installing the KIRK Wireless Server 600v3 you need to power up the KIRK Wireless Server
600v3. There are two ways of powering up the KIRK Wireless Server 600v3.
• Power over Ethernet (PoE)
Power options for the KIRK Wireless Server 600v3 is 24VDC, 18 W maximum when using
Power over Ethernet.
• Local Power Supply
Power options for the KIRK Wireless Server 600v3 is 48VDC, 1 W maximum when using
Local Power Supply.
Note: Only use one of the power options.
7.1.1 Power over Ethernet
The KIRK Wireless Server 600v3 supports Power over Ethernet, PoE 802.3af.