SpectraLink 600V3 Server User Manual


 
Configuring KIRK Wireless Server 600v3 129
KIRK Wireless Server 600v3 Installation and Configuration Guide
1 Under the Configuration menu, click LDAP, and then click Replicator.
Figure 82 Adm. Page: Configuration/LDAP/Replicator page
2 In the Server field, type the IP address of the LDAP Server.
3 In the User name field, type the user name.
4 In the Password field, type the password.
5 Select the Enable check box.
6 Click OK.
7 Click Reset (under Administration menu) to save your configuration.
The alternative LDAP Server is now configured.