Filter
Top Products
Configuring KIRK Wireless Server 600v3 77
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.3.2 How to Access the Administration Page
The web based Administration Page is accessed through a standard web browser.
1 Open a web browser.
2 In the browsers Address bar, type http://192.168.1.1, and then press ENTER.
Note: The KIRK Wireless Server 600v3 is pre-configured with the IP address: 192.168.1.1
through the ETH1 port.
The KIRK Wireless Server 600v3 Administration Page appears.
Figure 30 Main page of the Web Based Administration Page
7.4 Accessing the KIRK Configuration Tool
The KIRK Configuration Tool of the KIRK Wireless Server 600v3 is to be downloaded from
www.kirktelecom.com.
7.4.1 Installing the KIRK Configuration Tool
Once you download the KIRK Configuration Tool of the KIRK Wireless Server 600v3, install it
by clicking on the KWS600v3_Configuration_Tool_1.X.X.X_setup.exe and by following the
resulting Install Wizard prompts.