Filter
Top Products
Configuring KIRK Wireless Server 600v3 93
KIRK Wireless Server 600v3 Installation and Configuration Guide
5 In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KIRK Wireless Server
600v3.
6 In the Network mask field, type a new network mask.
7 In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8 Click OK.
9 Click Reset (under Administration menu) to save your configuration.
7.6.1.3 Obtaining a Multi-Cell License (Primary)
To configure a KIRK Wireless Server 600v3 Multi-cell solution it is necessary to obtain a
multi-cell license from www.kirktelecom.com.
1 Under the Configuration menu, click General, and then copy the serial number of the KIRK
Wireless Server 600v3 from the Info page.
2 Contact KIRK telecom sales support by e-mail (mph@kirktelecom.com or
hbk@kirktelecom.com) and require a multi-cell license for the KIRK Wireless Server 600v3.
Note: Remember to write/paste the serial number of the KIRK Wireless Server 600v3 in the
e-mail.
3 You will now receive an e-mail containing a text file with the multi-cell license.
Save this file. The text file is to be uploaded to the system.