Configuring KIRK Wireless Server 600v3 151
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.8.8 Uploading Configuration Files
This section describes how to upload configuration files.
Note: When uploading a configuration file to the KIRK Wireless Server 600v3, the KIRK
Wireless Server 600v3 in question must have a specific IP address valid to the whole network. To
ensure that the KIRK Wireless Server 600v3 has a specific IP address valid to the network either
get an IP address automatically through DHCP mode or assign a specific IP address through the
Administration Page. For more information about assigning a specific IP address through the
Administration Page, refer to
“Assigning a Specific IP Address (Primary)” on page 92.
1 On the File menu, click Upload.
A Select files to upload dialog box appears.
Figure 98 KIRK Configuration Tool: Select files to upload dialog box