Filter
Top Products
Configuring KIRK Wireless Server 600v3 115
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.1 Entering a User Name and Password (Secondary)
First time you access the Administration Page, you need to log on with user name and a password.
Note: In a KIRK Wireless Server 600v3 Multi-cell solution, all primary and secondary KIRK
Wireless Server 600v3 must have the same password. The default user name of the system is
admin and the default password of the system is ip1200. If you have changed the user name and
password when configuring the Master (Primary) KIRK Wireless Server 600v3, you must use
these when configuring the KIRK Wireless Server 600v3 secondaries.
Figure 68 Adm. Page: Enter Network Password dialog box
1 In the User Name field, type the user name.
2 In the Password field, type the password.
3 Click OK.