Filter
Top Products
System Management 185
KIRK Wireless Server 600v3 Installation and Configuration Guide
10.1.8 Updating the KIRK Wireless Server 600v3
This section describes how to update the following:
• “Updating Configuration File” on page 185
• “Updating Firmware” on page 186
• “Updating Radio File” on page 187
• “Updating Boot File” on page 188
10.1.8.1 Updating Configuration File
1 Under the Administration menu, click Upload.
Figure 130 Adm. Page: Administration/Upload/Config page
2 Click Browse.
A dialog box appears.
3 Select the configuration file in question, and then click Open.
4 Click Upload.
Wait until the system has finished updoading.
5 Click either Reset Immediately or Idle Reset.
When resetting the KIRK Wireless Server 600v3 immediately, all calls are terminated and the
KIRK Wireless Server 600v3 is reset. When resetting the KIRK Wireless Server 600v3 when
the system is idle, the reset is done when there are no active calls in the KIRK Wireless Server
600v3.