Filter
Top Products
86 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.5.5 Configuring DECT Master
On the Master page you can establish a communication protocol between the KIRK Wireless
Server 600v3 and a call handler.
1 Under the Configuration menu, click DECT, and then click Master.
Figure 39 Adm. Page: Configuration/DECT/Master page
2 From the Mode list, select Active.
3 In the GK (Gate Keeper) field, type the IP address of your call handler.
Contact your system administrator for more information.
4 In the Alt-GK (Alternative Gate Keeper) field, type an alternative IP address of your call
handler.
Contact your system administrator for more information.
5 From the Prot (Protocol) list, select either H323, SIP or SKINNY depending on the protocol
you are using.
6 Click OK.
7 Click Reset (under Administration menu) to save your configurations.