Configuring KIRK Wireless Server 600v3 91
KIRK Wireless Server 600v3 Installation and Configuration Guide
1 In the User Name field, type admin.
2 In the Password field, type ip1200
3 Click OK.
7.6.1.1.1 Changing User Name and Password
Optionally, you can choose to change the user name and password.
1 Under the Configuration menu, click General, and then click admin.
The following dialog box appears.
Figure 44 Adm. Page: Configuration/General/Admin/Change Password page
2 In the User name field, type a user name.
3 In the Password field, type a new password, then type the password again in the field below to
confirm it.
4 Click OK to change the password.
Note: In a KIRK Wireless Server 600v3 Multi-cell solution, all primary and secondary KIRK
Wireless Server 600v3 must have the same password.