Filter
Top Products
50 KIRK Repeater Installation
14117800, Ed.2
Note: The KIRK Repeater can only be registered on the system when placed within the coverage
area of a KIRK Wireless Server 600v3 or within the coverage area of an already-installed repeater.
A full slot repeater covers four simultaneous speech channels. These channels are borrowed from
the attached KIRK Wireless Server 600v3, and are not additional channels to the total number of
channels on the system.
5.4.1 Wall Mounted (Vertical) Installation RF Coverage
For best RF coverage, the KIRK Repeater must be mounted vertically on walls. The antennas must
always be kept perpendicular to the floor. The KIRK Repeater antennas are external and
adjustable.
Caution: The KIRK Repeater must not be installed at any angle other than vertical. If the KIRK
Repeater is placed upside-down, the coverage area of the KIRK Repeater is decreased by 40 - 50%
and it might not transmit or receive effectively.
Caution: Do not mount the KIRK Repeater on soft surfaced walls such as those covered with
canvas or sponge-like materials.
1 Pull the cable from the power supply (mains) through the mounting bracket.
Note: Do not mount the bracket onto the wall before pulling the cable.
Figure 14 Pull Power Supply Connector and Cable Through Mounting Bracket