Filter
Top Products
Configuring KIRK Wireless Server 600v3 139
KIRK Wireless Server 600v3 Installation and Configuration Guide
2 In the Gatekeeper area:
•From the Mode list, select Standby. Selecting Standby defines the KIRK Wireless Server
600v3 as an alternative (Standby) Master.
3 In the Radio field:
• Select the Disable check box to disable the radio.
4 Save the configuration now or wait until you have finished configuring the whole installation.
For more information about saving the configuration, refer to “Saving Configurations” on
page 150.
7.8.3 Configuring LDAP Server
In a KIRK Wireless Server 600v3 Multi-cell solution it is possible to configure an LDAP Server to
handle all handset/user registration data (such as name, directory number, IPEI etc.).
If you configure an LDAP Server to handle all handset/user registration and read/write information
between the primaries and secondaries of a KIRK Wireless Server 600v3 solution, then the Master
KIRK Wireless Server 600v3 only manage the connection to the call handler.
Note: Configuring an LDAP Server is only recommended in very large multi-cell installations
(more than 500-600 handsets).
Figure 89 KWS600v3 Multi-cell installation with LDAP Server
In the LDAP Server tab you configure the LDAP Server.
Note: The LDAP Server tab is only available, if the Master is LDAP Server check box on the
Master tab is deselected.