Filter
Top Products
17
KIRK Wireless Server 600v3 Installation and Configuration Guide
Chapter 1 Preface
This guide is intended for qualified technicians who will install, configure and maintain the KIRK
Wireless Server 600v3 Solution. To qualify to install the KIRK Wireless Server 600v3 Solution,
you must have successfully completed the KIRK Wireless Server 600v3 technical training. The
guide provides all the necessary information for successful installation and maintenance of the
wireless solutions.
This includes the installation and configuration of:
• KIRK Wireless Server 600v3
•KIRK Repeaters
• KIRK Handsets
The Installation Guide also provides you with information about:
• Web based Administration Page of the KIRK Wireless Server 600v3
• KIRK Configuration Tool for the KIRK Wireless Server 600v3
1.1 Before You Begin
This guide assumes the following:
• that users have a working knowledge of the call handlers operations
• that the call handler is installed and initialized and is working correctly
• that you have a working knowledge of deployment in general
• that a site survey has been conducted and that the installer has access to these plans
Note: The site survey should determine how many RF channels needed, number of handsets, user
areas alternative sync ways to be used, if an alternative (Standby) Master KIRK Wireless Server
600v3 is needed, and if an LDAP Server and an alternative LDAP Server are needed.