Filter
Top Products
Configuring KIRK Wireless Server 600v3 107
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.2.4 Configuring DECT Radio (Sync Master)
1 Under the Configuration menu, click DECT, and then click Radio.
Figure 59 Adm. Page: Configuration/DECT/Radio page
2 In the Master field, type the IP address of the Master (Primary) KIRK Wireless Server 600v3.
3 In the Radio-id field, type the radio ID of the Sync Master.
4 Click OK.
5 Click Reset (under Administration menu) to save your configuration.
The Sync Master is now configured.