Filter
Top Products
KIRK Handset Registration and Subscription 157
KIRK Wireless Server 600v3 Installation and Configuration Guide
3 In the Long Name field, type any name. It is recommended to type the same information as in
the Name field (see step 4 below).
4 In the Name field, type SEP followed by the IPEI number of the handset.
The IPEI number is found either on a label under the battery, on the packaging label, or by
pressing *99984*
3/OK on the handset to be registered. The serial number consists of a
five-digit handset type (manufacturer code) and then a seven-digit handset number.
For more information about retrieving the IPEI number (serial number), refer to “Retrieving
the Serial Number of the KIRK Handset” on page 70
Fore more general information about the IPEI number (serial number), refer to “Registering
KIRK Handsets” on page 155.
5 In the Number field, type a number (eg. 320).
Note: The number must be unique.
6 In the Display Text field, type a standby text (max. 36 characters) to be displayed when the
handset is on hook.
7 In the IPEI field, type the IPEI number of the handset.
8 In the Auth. Code field, type the authentication code (AC)(optional).
The authentication code is a subscription password of a maximum eigth digits, defined by the
technicians, and can be used when connecting the handset to the KIRK Wireless Server 600v3.
The authentication code is a subscription pin code for the individual handset.
9 Click Apply.
10 Repeat step 1 to 9 for each new handset to be registered to the system.
11 Click OK to save the registration(s).
In the DECT/Users page the new handset/user now has the status Pending, meaning that it is
ready for subscription.