Filter
Top Products
4.13 MDC module 4 Replacement Procedures
PORTEGE A200 Maintenance Manual (960-499) 4-29
4.13 MDC module
Removing the MDC module
To remove the MDC module, perform the following procedure. (See Figure 4-19.)
1. Remove the following screws fixing the MDC module.
? M2?4Z S-THIN HEAD screw ?2
2. Remove the MDC module from the connector PJ3010 on the system board.
3. Disconnect the MDC cable from the MDC module.
Figure 4-19 Removing the MDC module
Installing a MDC module
To install a MDC module, perform the following procedure. (See Figure 4-19.)
1. Connect the MDC cable to the MDC module.
2. Install the MDC module to the connector PJ3010 on the system board.
3. Fix the MDC module with the following screws.
? M2?4Z S-THIN HEAD screw ?2
MDC module
M2
?
4Z S
-
THIN HEAD
MDC cable
PJ3010