Filter
Top Products
4.20 Heat sink/CPU 4 Replacement Procedures
PORTEGE A200 Maintenance Manual (960-499) 4-43
Installing a CPU
To install a CPU perform the following procedure. (See Figure 4-33.)
1. Make sure the cam is in the open position.
2. Set the CPU in place on the CPU socket.
Caution: When setting the CPU on the socket, make sure that the triangle mark on
the CPU comes to the right position. (Refer to the figure below.)
Figure 4-33 Installing a CPU
3. Turn the cam clockwise 180 degrees with a flat-blade screwdriver to fix the CPU.
Cam
Mark