Filter
Top Products
4 Replacement Procedures 4.25 Hinge assembly
4-58 PORTEGE A200 Maintenance Manual (960-499)
4.25 Hinge assembly
Removing the hinge assembly
To remove the hinge assembly, perform the following procedure. (See Figure 4-48 and 4-49)
1. Remove the following screws fixing the hinge assemblies on the LCD cover side.
? M2.5?6 Tapping screw ?2 (left?1, right?1)
? M2.5?4B FLAT HEAD ?2 (left?1, right?1)
Figure 4-48 Removing the hinge assembly (LCD cover side)
2. Remove the following screws fixing the hinge assemblies on the base side.
? M2.5?4B FLAT HEAD ?4
Caution: Silicon grease is applied to screws on the base side. Drive the screws a little
strongly.
M2.5
?
6 Tapping
Hinge assembly
Hinge assembly
M2.5
?
4B FLAT HEAD
M2.5
?
4B FLAT HEAD