Filter
Top Products
4 Replacement Procedures 4.22 LCD unit
4-50 PORTEGE A200 Maintenance Manual (960-499)
4. Remove the following screws and detach the LCD supports from the LCD unit.
? M2?3C S-THIN HEAD screw ?4
Figure 4-40 Removing the LCD support
Installing a LCD unit
To install a LCD unit, perform the following procedure. (See Figure 4-38 to 4-40.)
1. Set the LCD supports to the LCD unit and fix them with the following screws.
? M2?3C S-THIN HEAD screw ?4
Caution: The shape of the right LCD support is different from the one of the left. Use
the correct LCD support.
2. Connect the LCD cable to the connector on the back of the LCD unit and fix it with
the glass tape.
3. Set the LCD unit on the LCD cover with the guide into the guide hole and fix it with
the following screws.
? M2?4Z S-THIN HEAD screw ?6
M2
?
3C S
-
THIN HEAD
M2
?
3C S
-
THIN HEAD
LCD support (right)
LCD support (left)