Filter
Top Products
4 Replacement Procedures 4.19 SD board/System board
4-38 PORTEGE A200 Maintenance Manual (960-499)
4.19 SD board/System board
4.19.1 SD board
Removing the SD board
To remove the SD board, perform the following procedure. (See Figure 4-28.)
1. Disconnect the SD cable from the connector PJ 9550 on the system board and from
the connector PJ9555 on the SD board.
2. Remove the SD board.
Figure 4-28 Removing the SD board
Installing a SD board
To install a SD board, perform the following procedure. (See Figure 4-28.)
1. Connect the SD cable to the connector PJ9555 on the SD board.
2. Connect the SD cable to the connector PJ 9550 on the system board and set the SD
board in place.
PJ9555
SD board
SD cable
PJ9550