Filter
Top Products
- 109 -
~ In the case of RFID (Data write)
Function Writes a specified data onto an RFID tag. When the feed amount has been set by the
RFID Tag Position Adjustment Command ([ESC] @003) for adjusting an RFID tag
position, the specified amount of the media is fed forward or backward before writing
data.
Format c [ESC]XBaa; bbbb, cccc, d (,Aeee) (,Mg) (,Ph) (,Fi) (,Tff) (,Djj) (,Gk) (,Cl) (,Smmmm)
(,Ennnn) (,Roooooooo) (,Kpppppppp) (,Lqq) (,Jrrrrrrrr) (,Vs) (,Btt) (,uvvvvvvvvvv)
(,Hxyyyyyyyy· · ·) (,Qzabcdef· · ·) (,Xghhhhhhhh· · ·) (=www------www)[LF][NUL]
d [ESC]XBaa; bbbb, cccc, d (,Aeee) (,Mg) (,Ph) (,Fi) (,Tff) (,Djj) (,Gk) (,Cl) (,Smmmm)
(,Ennnn) (,Roooooooo) (,Kpppppppp) (,Lqq) (,Jrrrrrrrr) (,Vs) (,Btt) (,uvvvvvvvvvv)
(,Hxyyyyyyyy· · ·) (,Qzabcdef· · ·) (,Xghhhhhhhh· · ·) (;ww
1
,ww
2
,ww
3
,-----,ww
20
) [LF]
[NUL]
Term aa: Bar code number
00 to 31
bbbb: Parameter not referred to
Fixed to 4 digits (in 0.1 mm units)
cccc: Parameter not referred to
4 or 5 digits (in 0.1 mm units)
d: Type of bar code
r: RFID (data write)
Aeee: Address where the data is written (Omissible)
000 to 999
Designates the address where data starts to be written.
When omitted, this parameter will be set to 18 for ISO18000-6B tag, or 0 for
other tag types.
Mg: Format of U-Code V1.19 (Omissible)
0: SGTIN 96 format
1: SSCC96 format
2: (Reserved)
When the format of U-Code V1.19 is designated, the specified address,
where the data is written, will become invalid. This parameter is effective
only when the tag type is ISO18000-6B.
When omitted, the U-Code V1.19 format is not used.
When 2: (Reserved) is selected, operations are not guaranteed.
Ph: Partition number (Omissible)
0 to 6
This parameter is effective only when U-Code V1.19 or EPC format is
designated. When omitted, 5 will be set.
Fi: Filter number (Omissible)
0 to 7
This parameter is effective only when U-Code V1.19 or EPC format is
designated. When omitted, 0 will be set.
Tff: Tag type (Omissible)
00: None
11: I-Code
12: Tag-it
13: C220
14: ISO15693