Filter
Top Products
- 198 -
6.3.22 BIT MAP WRITABLE CHARACTER COMMAND (For Flash Memory) [ESC] XD
Function Writes writable characters and logos in the flash memory card or flash ROM on the
CPU board.
Format [ESC] XD; (Sj, ) aa, b, ccc, ddd, eee, fff, ggg, h, iii ------ iii [LF] [NUL]
Term Sj: Drive in which writable characters or logos are stored
(Omissible. If omitted, flash ROM on the CPU board is selected.)
j: Drive
0: Flash ROM on CPU board
1: Slot 1 on the PCMCIA board (Option)
2: Slot 2 on the PCMCIA board (Option)
aa: Writable character set
• Flash memory card
01 to 40
41 16 × 16 dots
42 24 × 24 dots
43 32 × 32 dots
44 48 × 48 dots
• Flash ROM on the CPU board
01 to 40
41 16 × 16 dots
42 24 × 24 dots
43 32 × 32 dots
44 48 × 48 dots
51 2-byte code character
b(b): Writable character code
20H to FFH (Set in hex.)
40H to 7EH, 80H to FCH (When the writable character set is 41 to 44)
2020H to FFFFH (When the writable character is 51.)
ccc: Left offset
000 to 719 (in dots)
ddd: Top offset
000 to 719 (in dots)
eee: Character width
001 to 720 (in dots)
fff: Character height
001 to 720 (in dots)
ggg: Horizontal spacing/proportional spacing
000 to 999 (in dots)
h: Type of writable character data
0: Nibble mode (4 bits/byte)
1: Hex. mode (8 bits/byte)
iii --- iii: Writable character data to be stored
* If each parameter for left offset, top offset, character width, character height, and
horizontal spacing/proportional spacing is fixed as “000”, the setting is ignored when
the writable character set is 41 to 44.