Toshiba B-SX4T-GS20-QM-R Printer User Manual


 
- 154 -
When PDF417 or MicroPDF417 is used, the number of symbol characters called
code words is limited to 928 or less. Moreover, the data compression rate varies
according to the contents of data. Therefore, the maximum number of digits
according to modes is as follows.
When letters and numerics are mixed in data in EXC mode, for example, the
maximum values become smaller than the values below, since the internal mode
selection code is used.
To correct a reading error by designating the security level, the maximum value
becomes smaller, since the error correction code words below are used.
When the number of the code words exceeds 928, or when the number of rows
exceeds 90, the symbols are not drawn.
For the MicroPDF417, the numbers of rows and columns can be specified.
The maximum number of digits varies according to the setting.
In the case of PDF417
Extended Alphanumeric Compaction (EXC) mode: 1850 digits
Binary/ASCII Plus mode: 1108 digits
Numeric compaction mode: 2000 digits
In the case of MicroPDF417
Binary mode: 150 digits
Upper case letter/space mode: 250 digits
Numeric compaction mode: 366 digits
No. of Error Correction Code Words of PDF417
Security level Error Correction Ability
No. of error correction
code words
Level 0 0
Level 1 2
Level 2 6
Level 3 14
Level 4 30
Level 5 62
Level 6 126
Level 7 254
Level 8 510
Low
High
For the MicroPDF417, the printer
sets the security level automatically.