Filter
Top Products
- 245 -
6.4.3 RFID PARAMETER SET COMMAND [ESC] Z2; 3
Function Sets RFID related parameters on the printer.
Format [ESC] Z2; 3, abbcdddeeeffggghhijjkkkllmnnooppq [LF] [NUL]
Term a: RFID module type selection
0: Not installed.
1: H1 (B-9704-RFID-H1-QM)
2: U1 (B-9704-RFID-U1-US/EU(-R))
3: H2 (B-SX704-RFID-H2)
4: U2 (B-SX704-RFID-U2-EU/US/CN/AU-R)
bb: Tag type
00: None
11: I-Code
12: Tag-it
13: C220
14: ISO15693
15: C210
16: C240
17: C320
21: EPC Class 0
22: EPC Class 1
23: ISO 18000-6B
24: EPC Class 1 Generation 2
c: RFID error tag detection
(Invalid from firmware V4.7. This is programmed in the printer system mode.)
0: Not detected.
1: Detected.
ddd: Max. number of RFID issue retries
000 to 255
eee: Max. number of RFID read retries
000 to 255
ff: RFID read retry time-out
00 to 99 (In units of 0.1 sec.: 0.0 sec. to 9.9 sec.)
ggg: Max. number of RFID write retries
000 to 255
hh: RFID write retry time-out
00 to 99 (In units of 0.1 sec.: 0.0 sec. to 9.9 sec.)
i: Feed direction of adjustment for retry
+: Backward
−: Forward
jj: Feed amount of adjustment for retry
00 to 99 (In units of 1 mm: 0 mm to 99 mm)
Only the value of −3 mm or less, or +3 mm or more becomes effective.
kkk: RFID wireless power level
000 to 255