Filter
Top Products
- 169 -
[C: Batch mode (Cut interval: 1, Issue count: 2)]
• “Automatic forward feed standby” is set to OFF in the system mode.
• The rotary cutter is used.
(1) Idling (at the home position)
A
A
B
B
A
B
Head positionCut position
(2) Completes printing the 1st label (A).
(3) Starts printing the 2nd label (B).
(4) The 1st label (A) reaches the cut position
and is cut.
(5) Completes printing the 2nd label (B).
(6) Feeds the 2nd label (B) to the cut position.
(7) The 2nd label (B) reaches the cut position
and is cut.
B
B
(9) Feeds back to the home position.
(8) Since non-stop cutting is performed, pape
r
is fed and stopped over the cut position.