Filter
Top Products
- 166 -
g Reflective sensor (when using a manual threshold value)
Printing takes place according to the parameters designated by the Label Size
Set Command. However, the black mark provided on the back of the tag
paper is automatically sensed by the reflective sensor and the paper position
is finely adjusted for every piece, according to the value set by the threshold
setting operation (key operation).
(4) Issue mode
[C: Batch mode (Cut interval: 0, Issue count: 3)]
• “Automatic forward feed standby” is set to OFF in the system mode.
[C: Batch mode (Cut interval: 0, Issue count: 3)]
• “Automatic forward feed standby” is set to ON in the system mode.
Head position
A
A
B
A
B C
(1) Idling (at the home position)
(2) Prints the 1st label (A).
(3) Prints the 2nd label (B).
(4) Prints the 3rd label (C).
Head position
A
A
B
(1) Idling (during the forward feed standby)
A
B
(3) Prints the 1st label (A).
C
(4) Prints the 2nd label (B).
(5) Prints the 3rd label (C).
A
B C
(6) After 1 second, performs 13.7-mm
automatic forward feed.
(2) Feeds back to the home position.