Filter
Top Products
- 172 -
[E: Strip mode (Issue mode: E)]
The expansion I/O is installed:
The strip sensor is ignored. An issue is performed by checking a PAUSE
signal generated from the expansion I/O.
A
B
C
Head positionStrip position
(1) Idling
The PAUSE signal generated from the expansion
I/O, is turned ON.
(3) Completes printing the 1st label (A).
The PAUSE signal generated from the expansion
I/O, is turned ON.
(4) Remove the 1st label (A).
The PAUSE signal generated from the expansion
I/O, is turned OFF.
(6) Completes printing the 2nd label (B).
The PAUSE signal generated from the expansion
I/O, is turned ON.
(7) Remove the 2nd label (B).
The PAUSE signal generated from the expansion
I/O, is turned OFF.
(9) Completes printing the 3rd label (C).
The PAUSE signal generated from the expansion
I/O, is turned ON.
* When the PAUSE signal generated from the expansion
I/O is on, a label is not printed.
(2) The PAUSE signal generated from the expansion
I/O, is turned OFF.
Feeds back to the home position.
(5) Feeds back to the home position.
(8) Feeds back to the home position.