Filter
Top Products
- 39 -
[mm]
Model B-SX4T B-SX5T
Cut Cut
Swing Rotary cutter Swing Rotary cutter
Issue mode
Item
Batch Strip cutter
Head-up
operation
not
performed
Head-up
operation
performed
Batch Strip cutter
Head-up
operation
not
performed
Head-up
operation
performed
Thermal head dot density 8 dots/mm (203 dpi) 12.05 dots/mm (306 dpi)
Thermal head width 104.0 mm 127.5 mm
Range of values which can be set on the software
A: Label pitch
Tag pitch
3 ips:
94.0
3 ips:
38.0
3 ips:
94.0
3 ips:
38.0
Label Min. 10.0 25.4 38.0 6 ips:
106.0
6 ips:
38.0
10.0 25.4 38.0 5 ips:
102.0
5 ips:
38.0
10 ips: –
(NOTE 1)
10 ips: –
(NOTE 1)
8 ips:
113.0
8 ips:
38.0
Max. 1500.0 1500.0
3 ips: 30.0 3 ips: 30.0
Tag Min. 10.0 – 25.4 6 ips: 30.0 10.0 – 25.4 5 ips: 30.0
10 ips: – (NOTE 1) 8 ips: 38.0
Max. 1500.0 – 1500.0 1500.0 – 1500.0
B: Label length 3 ips: (*1)
81.0
3 ips:
32.0
3 ips: (*4)
81.0
3 ips:
25.0
Min. 8.0 23.4 25.0 (*3) 6 ips: (*2)
93.0
6 ips:
32.0
8.0 23.4 25.0 (*7) 5 ips: (*5)
89.0
5 ips:
25.0
10 ips: –
(NOTE 1)
10 ips: –
(NOTE 1)
8 ips: (*6)
100.0
8 ips:
25.0
Max. 1498.0 1494.0 1498.0 1494.0
Min. 30.0 50.0 30.0 30.0 50.0 30.0 C: Backing paper width
Tag width
Max. 112.0 140.0 112.0
D: Label width Min. 27.0 27.0
Max. 109.0 137.0 109.0
E: Label-to-label gap Min. 2.0 6.0 2.0 6.0
Max. 20.0 20.0
F: Black mark length Min. 2.0 2.0
Max. 10.0 10.0
G: Effective print width Min. 10.0 10.0
Max. 104.0 128.0
H: Effective
print length
3 ips:
79.0
3 ips:
30.0
3 ips:
79.0
3 ips:
23.0
Label Min. 6.0 21.4 23.0 6 ips:
91.0
6 ips:
30.0
6.0 21.4 23.0 5 ips:
87.0
5 ips:
23.0
10 ips: –
(NOTE 1)
10 ips: –
(NOTE 1)
8 ips:
98.0
8 ips:
23.0
Max. 1496.0 1492.0 1496.0 1492.0
3 ips: 28.0 3 ips: 28.0
Tag Min. 8.0 – 23.4 6 ips: 28.0 8.0 – 23.4 5 ips: 28.0
10 ips: – (NOTE 1) 8 ips: 36.0
Max. 1498.0 – 1498.0 1498.0 – 1498.0
I: Slow up/ Slow-up 1.0 1.0
down interval Slow-down 1.0 1.0
Max. effective print length for
on-the-fly issuing
749.0 749.0
NOTE 1: The use of the rotary cutter at 10 ips is not supported for the B-SX4T.