Filter
Top Products
- 273 -
LCD Messages Printer Status Output Signal
of Upper Line (English)
Busy Select nFault PError
EEPROM ERROR
An EEPROM for back-up cannot be
read/written properly.
H L L L
SYSTEM ERROR
(a)
A
command has been fetched from an
odd address.
(b) Word data has been accessed from a
place other than the boundary of the word
data.
(c) Long word data has been accessed from
a place other than the boundary of the
long word data.
(d)
A
n undefined command in a place other
than the delay slot has been decoded.
(e)
A
n undefined command in the delay slot
has been decoded.
(f) A command which rewrites the data in the
delay slot has been decoded.
H L L L
RFID WRITE ERROR
Writing data onto the RFID tag continuously
failed for the maximum number of RFID write
retries.
H L L L
RFID ERROR
The printer cannot communicate with the
RFID module.
H L L L
INPUT PASSWORD
The printer is waiting for a password to be
entered.
H L L L
PASSWORD INVALID
Password entered was not correct
consecutively for three times.
H L L L
RFID CONFIG ERR
B-SX704-RFID-U2-US-R only
RFID module’s destination code is not
specified
H L L L
9.3 E-MAIL
The printer can notify the PC of the printer status by e-mail. The status to be notified by e-mail is the
same as the status which is notified through the serial interface. For details, refer to the Network
Specification (TAA-1401).