Filter
Top Products
- 40 -
B-SX4T:
(*1): When a cut issue is performed at 3 ips by using the rotary cutter, label length B should be
as follows:
Label length
B ≥ 91.0 mm -
(*2): When a cut issue is performed at 6 ips by using the rotary cutter, label length
B should be
as follows:
Label length
B ≥ 103.0 mm -
(*3): When a cut issue is performed by using the swing cutter, label length
B should be as
follows:
Label length
B ≥ 35.0 mm -
B-SX5T:
(*4): When a cut issue is performed at 3 ips by using the rotary cutter, label length B should be
as follows:
Label length
B ≥ 91.0 mm -
(*5): When a cut issue is performed at 5 ips by using the rotary cutter, label length
B should be
as follows:
Label length
B ≥ 99.0 mm -
(*6): When a cut issue is performed at 8 ips by using the rotary cutter, label length
B should be
as follows:
Label length
B ≥ 110.0 mm -
(*7): When a cut issue is performed by using the swing cutter, label length
B should be as
follows:
Label length
B ≥ 35.0 mm -
Label-to-label gap
2
Label-to-label gap
2
Label-to-label gap
2
Label-to-label gap
2
Label-to-label gap
2
Label-to-label gap
2
Label-to-label gap
2