Filter
Top Products
- 183 -
[C: Batch (Cut)]
• “Automatic forward feed standby” is set to ON in the system mode.
• The rotary cutter is used.
[D: Strip]
Head positionStrip position
(1) Place paper.
(2) Feeds back to the home position.
* Even if a label is not removed, a feed is
performed.
(3) Starts a feed.
(4) Completes a feed.
(Completes feeding to the top of form and stops)
(2) Completes a feed.
(Completes feeding to the top of paper.)
Head positionCut position
(1) Place paper.
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(6) Feeds back to the home position.
(7) After 1 second, performs 13.7-mm automatic
forward feed.
(5) Since non-stop cutting is performed, paper is
fed and stopped over the cut position.