Filter
Top Products
- 25 -
(3) Various parameters settings
• Feed fine adjustment
• Cut (strip) position fine adjustment
• Back feed fine adjustment
• X-coordinate fine adjustment
• Print density fine adjustment (Thermal transfer print mode)
• Print density fine adjustment (Direct thermal print mode)
• Ribbon motor drive voltage fine adjustment (Rewind)
• Ribbon motor drive voltage fine adjustment (Back tension)
• Reflective sensor manual threshold fine adjustment
• Transmissive sensor manual threshold fine adjustment
(4) Test print
• Operation conditions setting
• 1-dot slant line printout
• 3-dot slant line printout
• Character printout
• Bar code printout
• Non-printing
• Line printout for the assembly process
• Automatic printout for the assembly process (Transmissive sensor)
• Automatic printout for the assembly process (Reflective sensor)
(5) Sensor display/adjustment
• Thermal head temperature sensor display
• Open-air temperature sensor display
• Heat sink sensor display
• Reflective sensor display/adjustment
• Transmissive sensor display/adjustment
• Reflective sensor adjustment value setting (without paper)
• Transmissive sensor adjustment value setting (without paper)
• Ribbon end sensor display/adjustment
(6) RAM clear
• Maintenance counter clear
• Parameter clear
(7) IP address setting
• Printer IP address
• Gateway IP address
• Subnet mask
• Socket communication port
• DHCP setting
• DHCP client ID setting
(8) BASIC setting
• BASIC setting
• BASIC file browser
• BASIC trace setting