Filter
Top Products
- 182 -
[C: Batch (Cut)]
• “Automatic forward feed standby” is set to ON in the system mode.
• The swing cutter is used.
[C: Batch (Cut)]
• “Automatic forward feed standby” is set to OFF in the system mode.
• The rotary cutter is used.
(2) Completes a feed.
(Completes feeding to the top of paper.)
Head positionCut position
(1) Place paper.
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Feeds back to the home position.
(6) After 1 second, performs 13.7-mm automatic
forward feed.
(2) Completes a feed.
(Completes feeding to the top of paper.)
Head positionCut position
(1) Place paper.
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Since non-stop cutting is performed, paper is
fed and stopped over the cut position.
(6) Feed back to the home position.