Filter
Top Products
- 187 -
6.3.16 EJECT COMMAND [ESC] IB
Function Ejects (cuts) the label presently remaining between the head and the cutter and returns
to the original position.
Format [ESC] IB [LF] [NUL]
Notes If no subsequent command is received from the PC for 1 second after ejection, the
printer automatically performs an approximately 13.7-mm forward feed when
“Automatic forward feed standby” is set to ON in the system mode.
When the Eject Command is received in the forward feed standby state, the printer
feeds the label in reverse to the original position, and then ejects it.
* For notes, refer to the section regarding the Issue Command.
Examples • The swing cutter is used:
Head position
(1) Idling
(2) Completes printing the 1st label (A).
Cut position
(3) Completes printing the 2nd label (B).
(4) Completes printing the 3rd label (B).
(5) Feeds to the cut position by the Eject
Command
A
A
A
A
A B
B
B
B
C
C
C
(6) Completes cutting labels.
(7) Feeds back to home position.