Filter
Top Products
- 115 -
~ In the case of RFID (Data read)
Function Reads an RFID tag which is positioned above the antenna. When the feed amount
has been set by the RFID Tag Position Adjustment Command ([ESC] @003) for
adjusting an RFID tag position, the specified amount of the media is fed forward or
backward before reading the RFID data. The read RFID data is transmitted included
in an RFID read terminate status after printing is completed.
Format c [ESC] XBaa; bbbb, cccc,d (,Neeee) (,Afff) (,Tgg) (,Ih) (,Jiiiiiiii) (,Xjkkkkkkkk · · ·) [LF]
[NUL]
Term aa: Bar code number
00 to 31
bbbb: Parameter not referred to
Fixed to 4 digits (in 0.1 mm units)
cccc: Parameter not referred to
4 or 5 digits (in 0.1 mm units)
d: Type of bar code
r: RFID (data read)
Neee: Number of bytes to be read (Omissible)
0001 to 4096
When omitted, the number of bytes specified for the tag type being used will
be designated.
Afff: Address where the data is read (Omissible)
000 to 999
Designates the address where data starts to be read.
When omitted, this parameter will be set to 18 for ISO18000-6B tag, or 0 for
other tag types.
Tgg: Tag type (Omissible)
00: None
11: I-Code
12: Tag-it
13: C220
14: ISO15693
15: C210
16: C240
17: C320
21: EPC Class 0
22: EPC Class 1
23: ISO 18000-6B
24: EPC Class 1 Generation 2
Designates the type of RFID tag from which data is to be read.
When omitted, the tag type set in the system mode will be designated.
In accordance with the tag type designated by this setting, the tag type set in
the system mode changes.
When “00: NONE” is designated, the backed up tag type will be designated,
and the system mode setting will not be changed.