Emerson BACNET IP Power Supply User Manual


 
BACnet Communications - UPS Systems
Liebert
®
IntelliSlot
®
Modbus/BACnet IP 340
System Output Frequency The system output frequency
System Output Low Power Factor The system output power factor is low, resulting in reduced output capacity
System Output Maximum Amp Rating System output maximum amperage rating
System Output Nominal Frequency The nominal (or rated) system output frequency
System Output Nominal Voltage The nominal (or rated) system output voltage
System Output Off The system output is off
System Output Pct Power Phase A The system output power on phase A as a percentage of the rated capacity
System Output Pct Power Phase B The system output power on phase B as a percentage of the rated capacity
System Output Pct Power Phase C The system output power on phase C as a percentage of the rated capacity
System Output Pct Pwr (VA) Phs A
The system output apparent power on phase A as a percentage of the rated
capacity
System Output Pct Pwr (VA) Phs B
The system output apparent power on phase B as a percentage of the rated
capacity
System Output Pct Pwr (VA) Phs C
The system output apparent power on phase C as a percentage of the rated
capacity
System Output Power Factor Phs A The system output power factor of phase A
System Output Power Factor Phs B The system output power factor of phase B
System Output Power Factor Phs C The system output power factor of phase C
System Output Power The sum total power of all system output phases
System Output RMS Current Phs A The system output RMS current for Phase A
System Output RMS Current Phs B The system output RMS current for Phase B
System Output RMS Current Phs C The system output RMS current for Phase C
System Output Voltage RMS A-B The system output RMS voltage between phases A and B
System Output Voltage RMS A-N The system output RMS voltage between phases A and Neutral
System Output Voltage RMS B-C The system output RMS voltage between phases B and C
System Output Voltage RMS B-N The system output RMS voltage between phases B and Neutral
System Output Voltage RMS C-A The system output RMS voltage between phases C and A
System Output Voltage RMS C-N The system output RMS voltage between phases C and Neutral
System Shutdown - EPO System shutdown due to Emergency Power Off (EPO)
System Shutdown - REPO System shutdown due to Remote Emergency Power Off (REPO)
System Status The operating status for the system
System UPS Module Count Number of UPS modules in the system
Time Remaining - ECO Mode Time remaining before current active ECO Mode session stops.
Total kW Hours Saved Total kW hours saved by ECO Mode or Intelligent Paralleling.
Total Number of Battery Discharges The total number of battery discharges.
Total System Operating Time The cumulative operation time of the unit
Trap Filter Disconnect Trap filter disconnect
UPS Battery Status UPS battery status
UPS Module Type UPS module type
UPS Output on Bypass The output power is supplied by the bypass
UPS Output Source UPS output source
UPS System Output Source The UPS system's output power source
User kWh Reset The user kWh accumulator was reset to zero by the operator.
Table 109 Liebert NXL
- 60Hz, UL version (Model 40) - Glossary (continued)
Data Label Data Description