Filter
Top Products
NOTE When you move the mouse cursor over the dimensions label, the cursor changes from
an arrow to a gloved hand. Click the dimensions label to toggle between English and metric units.
You can specify size for all of the settings in the Paper Options group box. When you set the media
size in the driver, the entire print-job output uses that media size. That is, if the print job uses Letter-size
media, any option that you select from the available Use Different Paper/Covers options must also
use Letter-size media.
Because print-driver settings are overridden by media-size settings in most software programs, it is
generally best to use the print driver to set media size only for software programs that lack a media-size
setting, such as NotePad, or when you are producing a book or a booklet that does not require different
media sizes.
NOTE Certain software programs can override the size command and specify different media
sizes within a single document.
When you change the print-driver setting to a media size that is not currently loaded in the device,
a control-panel message appears that prompts you to load the media size or select another tray.
For information about media sizes, see Media attributes.
When the Use Different Paper/Covers check box is selected and different options are configured,
the Size is:, Source is:, and Type is: menus change, offering a variety of options.
Custom
The Custom Paper Size dialog box appears when you click the Custom button on the Paper tab. The
following figure shows the initial appearance of the Custom Paper Size dialog box.
NOTE The Custom button is not available when Use Different Paper/Covers is selected
and any setting other than First Page is also selected.
Figure 4-13 Custom Paper Size dialog box
ENWW Paper tab features 137
HP traditional print
drivers for MS Windows