Filter
Top Products
The Source is: drop-down menu can contain the following options, depending on what has been
installed on the device:
●
Automatically select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (250-sheet tray)
●
Tray 3 (optional 500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP LaserJet 5200 uses
the source tray that supports the media size that you have selected. If you select a source tray other
than Automatically select, make sure that the correct media size is loaded in the source tray.
Type is
The Type is: drop-down menu shows all of the media types that the HP LaserJet 5200 supports. When
you use the default setting, Unspecified, the printer uses the default media type, which is usually
Plain.
The following standard types appear in the list:
●
Unspecified
●
Plain
●
Preprinted
●
Letterhead
●
Transparency
●
Prepunched
●
Labels
●
Bond
●
Recycled
●
Color
●
Cardstock 164-200 g/m2 (45–53 lb)
●
Rough
●
Vellum
●
Envelope
●
Light 60-75 g/m2 (16–20 lb)
●
Tough Paper (Glossy Film)
The default setting is Unspecified, and the program selects the media type. If you select a different
setting, make sure that the correct media type is loaded in the tray that you selected in the Source is:
setting.
142 Chapter 4 HP traditional print drivers for MS Windows ENWW
HP traditional print
drivers for MS Windows